Power supplies

One- and three-phase power supplies

Benefits of our power supplies (one- and three-phase power supplies)

  • Single-phase and three-phase power supply units as well as customer-specific applications possible
  • Adaptation and flexibility to specific customer requirements and broad portfolio
  • High quality, long usability and robust power supply made in Germany
  • Available as standard or customer-specific solution

Single-phase power supplies

Single-phase power supply unit series FGSE

Einphasen-Netztteil Einphasennetzteil FGSE blau zu kaufen

Type series FGSE according to VDE 0570 / EN 61558 Part 2 – 6

  • Ripple < 5 %
  • Open installation design
  • Rated current range 1 – 6 A
  • Protection class IP 00
  • Transformer according to VDE 0570 Part 2 – 6, protection class I
  • Ambient temperature max. 60° C
  • Screw terminals with self-lifting
    Disc for conductor cross-section up to 1.5 mm2
  • Additional flat connector 2.8 x 0.8 DIN 46244
  • Foot angle fastening
  • Short-circuit protection due to internal fine securing
    5 x 20 in DC circuit
  • PFC according to EN 61000-3-2
  • Contact protection according to VBG 4
  • Output rated voltage 24 VDC according to DIN 19240
  • Idle voltage < 30.2 VDC at
    6 % grid overvoltage
  • Full load voltage > 20.4 VDC
    at 10 mains undervoltage
  • LED power indicator
  • Switch-on time 100


Position

  • Wall-mounted, clamps horizontally up and down
  • In case of different assembly
    approx. 20 performance reduction

Single-phase network device type series ESKE

Einphasen-Netztteil Einphasennetzteil ESKE blau

Type series ESKE according to VDE 0570 / EN 61558 Part 2 – 6 ripple < 5

  • Open installation design
  • Rated current range 10 – 16 A
  • Protection class IP 00
  • Transformer according to VDE 0570 Part 2 – 6, protection class I
  • Shield winding between primary and secondary
  • Ambient temperature max. 60° C
  • Connection to contact-protected
    Screw terminal
  • Foot angle fastening
  • Protection external
  • PFC according to EN 61000-3-2
  • Contact protection according to VBG 4
  • Output rated voltage 24 VDC according to DIN 19240
  • Idle voltage < 30.2 VDC
    at 6 mains overvoltage
  • Full load voltage > 20.4 VDC
    at 10 mains undervoltage
  • Switch-on time 100


Position

  • Cooling ribs perenning
  • In case of different assembly
    approx. 20 performance reduction

Three-phase power supplies

Three-phase power supply
Type series DSK/ DSKE

Dreiphasen-Netzteil Dreiphasennetzteil
Type series DSKE with sieve-Elkos residual ripple < 3
Type-reel DSK without sieve-Elkos residual ripple < 5

according to VDE 0570 / EN 61558 Part 2 – 6

Certified
  • Ripple < 5 or < 3
  • Open installation design
  • Rated current range 6 – 40 A
  • Protection class IP 00
  • Transformer according to VDE 0570 Part 2 – 6, protection class I
  • Shield winding between primary and secondary
  • Ambient temperature max. 60° C
  • Connection to contact-protected screw terminals
  • Foot angle fastening
  • Protection external
  • 137-106 and 137-106.200 with internal fine fuse 6.3 A
  • PFC according to EN 61000-3-2
  • Contact protection according to VBG 4
  • Output rated voltage 24 VDC according to DIN 19240
  • Idle voltage < 30.2 VDC at
    6 Mains overvoltage
  • Full load voltage > 20.4 VDC at
    10% grid undervoltage
  • Switch-on time 100


Position

  • Cooling ribs perenning
  • In case of different assembly

    approx. 20% performance reduction

Customer-specific applications

Trafonetzteil Large kitchens

Netzteil für Großküchen
  • Requirements

    • Underdistributed output voltages
    • Output voltage in DC and AC
    • Secured output voltage due to
      Car fuse / flat fuse

Trafonetzteil Mechanical Engineering

Netzteil Lösung Trafonetzteil kundenspezifische Lösung

Application: Mechanical Engineering

  • Input 3 x 196 – 500 VAC
  • Efficiency 94%
  • Secondary voltage 1: 24 VDC / 36 A
  • Secondary voltage 2: 1 x 120 VAC / 720 VA
    or: 1 x 230 VAC / 920 VA
  • Safety according to EN 61558-2-4 / UL / CSA T 40 / A
  • Shield winding between primary and secondary winding
  • Load distribution on board with flat fuses
  • Connection to contact-protected spring force
    (Wago / Ria Connect)
  • Installation in the control cabinet floor: lying down
  • Ambient temperature max. 40° C

Trafonetzteil Mechanical Engineering

Einphasen-Netzgerät Machinenbau Einsatz

Application: Mechanical Engineering

according to VDE 0570 / EN 61558 Part 2 – 6

  • Stabilized
  • Open installation design
  • Input voltage 230 / 400 V x 10
  • Frequency 50 / 60 Hz
  • Primary current 0.14 A / Inrush current 1.67 A
  • Output voltage 10 VDC / 1.0 A stabilized
  • With internal G-fuse 1.0 AT
  • Insulation class T 60 / B
  • Protection class IP 00
  • Protection class I
  • Ambient temperature max. 60° C
  • Screw terminals with self-lifting disc
    for conductor cross-section up to 1.5 mm2
  • Foot angle attachment: mounting position wall-hanging,
    Clamps horizontally at the top and bottom, in case of
    softening assembly approx. 20 performance reduction
  • LED power indicator in DC circuit
  • Contact protection according to VGB 4

We are happy to answer your questions

Click here to get in touch with us

Scroll to Top